There may be a charge from your dealer for this. If you are not the original owner of the alarm or the alarm was fitted prior to August 2015, we recommend you contact your local dealer who will be able to issue suitable confirmation that the alarm is fitted and is fully operational. If your alarm was fitted after August 2015, you may have an online account with Datatool and can download a certificate from there. The fitting certificate is only valid at time of installation. Can you send me an insurance certificate? If your alarm system is less than 3 years old, please email your name and address along with a photo of the alarm unit showing the serial number (on the back of the unit) and a copy of the original fitting certificate (if available) .uk. If your alarm is over 3 years old the warranty has expired and there is no reason to register as the new owner, unless your alarm is a recall affected unit. We do not keep records of PIN codes but if you have at least one working remote you can simply overwrite the existing code with a new one. The dealer can then contact the Triumph UK Sales Office and they will provide them with the correct part number for the plug which the dealer can then order. To order you will need to provide proof of ownership ie V5 and proof of home address (utility bill). No, this is a Triumph part available only from Triumph dealers. The vehicle remains immobilised but the remote controls and movement sensing are inoperative until the next time the ignition is switched on. Please note: Winter mode effectively disables the alarm to minimise the loading on the vehicle battery when in long term storage. With the alarm disarmed, the ignition switched on and the engine kill switch in the run positon, press and hold both buttons on the remote for approximately 10 seconds until the alarm makes a single bleep, then turn off the ignition. How do I access winter mode / storage mode? Please contact us directly for further information. We cannot provide a wiring diagram so please contact your local dealer or mobile installer to discuss the installation options. The S4 series alarm is intended for professional installation only and therefore should not have been supplied to you for home installation. Can you send me a wiring diagram to install my alarm? Please consult your local dealer or mobile installer for assistance. We cannot provide details on how to remove or bypass any of our alarm systems in the interests of protecting the many thousands of customers who continue to rely on the security provided by their Datatool alarm. If you would like the alarm to arm the movement sensor automatically (or this has already been done and you would like to revert to arming without movement detection) please consult the user guide available here. The alarm only needs to be disarmed before turning the ignition on or removing the seat (if the seat has a trigger switch fitted). The standard setting for the S4 Green is to arm without movement detection so the bike can still be moved around without setting the alarm off. It is a Thatcham requirement that the alarm arms automatically. Can I turn off the automatic arming on my S4 Green? Contact us on and our team will get back to you as soon as possible.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |